/ Alım Satım İlanları için İhracatı İlanları, İthalat ve İhracat

3/4" X 4" STUD BOLT C/W 2 NUTS ZP BOLTS ASTM A193 B7 NUTS ASTM A194 2H (100 MM)

we are looking for steel clamps such as those described in the attached files. Please let us know if you can produce this model

i need a manufacturer for pipe clamps which shall use to MEP installation

The support is designed to compensate vertical loads acting on the pipeline. Material design of the support depending on the minimum operating temperature: steel 20 GOST 1050-88 (up to - 40°C); steel 09G2S GOST 19281-89 (up to - 60°C). Height adjustment limit by means of adjusting bolts - 35 mm. In case of insufficient height adjustment of the support, it is allowed to install metal pads under the support plate. plate. Place of installation - underground